ATSafePro

- Product category: digital tire tread depth gauge / tread wear measuring tool. - Likely function: measures remaining tire tread depth by resting the base across tread blocks and extending a probe into the main groove; the image shows a “how to use” guide for zeroing, positioning, and reading the result. - Visible structure and components: - Rectangular handheld body with large LCD display. - Sliding probe/ruler scale extending from one end, marked in millimeters. - Two bottom control buttons, including an ON/OFF button and a zeroing function indicated in the instructions. - Broad base/feet designed to sit flat on the tread surface. - Black housing with red trim; display shows measurements such as 0.00 and 3.87 mm. - Material / finish: - Appears to be molded plastic housing with a matte black body and glossy or semi-gloss red accent frame. - Printed scale and digital screen; no metal parts clearly visible beyond the internal probe mechanism, which is not fully visible. - Likely manufacturing process / service category: - Consumer/automotive measuring instrument; likely injection-molded plastic assembly with electronic display and internal sensor/probe mechanism. - Exact sensing method is not visible and should not be assumed. - Practical applications / buyer use cases: - Checking tire wear on passenger cars, light trucks, or similar vehicles. - Useful for routine vehicle maintenance, safety inspections, fleet checks, and verifying whether tires remain within usable tread depth. - Could be used by mechanics, tire shops, auto detailing businesses, or vehicle owners. - Measurable / verifiable selling points visible in the image: - Digital readout in millimeters. - Zero-calibration/zeroing function shown in the instructions. - Large LCD for direct reading. - Example measurement displayed: 3.87 mm. - Unknown / should not be invented: - Accuracy, resolution, battery type, waterproof rating, material grade, temperature resistance, and exact measurement range are not shown. - Brand/model text is partially visible but not reliable enough to confirm a full product identification from the image alone. - Product category: digital caliper / digital measuring tool for linear dimension measurement. - Likely function: measures lengths/diameters and displays readings in three selectable units/modes: millimeter, decimal inch, and fractional inch. - Visible structure and components: - Large LCD digital display with unit indicators - Sliding scale/ruler body with engraved/printed scale markings - Fixed measuring jaw/body section on the left and a sliding beam/measurement arm on the right - Two red control buttons beneath the display; notes indicate one-button switching between display modes - Black housing with red display border/accent trim - Material / finish: - Appears to be a plastic or composite outer housing with a smooth matte black finish - Ruler/beam section appears to be metal with printed or etched scale markings - Exact materials and internal construction are not shown - Likely manufacturing/process category: - Precision measuring instrument; likely injection-molded housing with metal beam/scale components and electronic LCD assembly - This is an inference; exact process cannot be confirmed from the image alone - Visible/verifiable selling points from the image: - 3 display modes - One-button unit switching - Millimeter mode resolution shown as 0.01 mm - Decimal inch mode resolution shown as 0.0005" - Fractional inch display for easier reading - IP54 marking visible on the display, suggesting some dust/splash resistance, but the exact certification scope is not stated - Practical applications / buyer use cases: - General workshop, machining, inspection, woodworking, and maintenance measurement tasks - Useful where users need to switch between metric and inch readings quickly - Helpful for users who prefer fractional inch readouts instead of decimals - Unknown / should not be invented: - Exact measurement range - Accuracy specification - Jaw length, spindle travel, or scale length - Battery type and runtime - Whether it measures outside/inside/depth specifically - Brand/model details beyond the visible logo - Exact IP54 test standard or certification status - Product category: digital tire tread depth gauge / tread-depth checker for routine tire maintenance. - Likely function: measures tire tread depth, with a digital display and a built-in backup reference scale for quick readings in different units. - Visible materials/finish/structure: - Black plastic body with red accent trim around the display. - Rectangular handheld form factor with angled edges. - LCD screen showing measurement readout. - Stainless steel probe/needle extending from one end. - Integrated hanging hole/slot in the housing. - Buttons visible near the display, including on/off control. - Branding shown as “GOODESON.” - Claimed/supplied features visible in the image: - IP54 water-resistant rating; text says it helps protect against dust and water splashes during routine use. - Backup reference scale on the body. - Integrated hanging hole. - Stainless steel probe. - Likely manufacturing/process category: - Consumer/automotive measuring instrument assembly, likely injection-molded plastic housing with metal probe and electronic display; exact process not verifiable from the image. - Practical applications / buyer use cases: - Tire shops, auto service centers, fleet maintenance, dealerships, and vehicle owners checking tire wear. - Useful for routine safety checks and monitoring when tires may need replacement. - Measurable/verifiable details visible: - IP54 rating. - Backup scale includes marked gradations and numeric units. - Digital readout shown on screen, but exact measurement values are not reliably readable. - Unknown / should not be invented: - Exact measurement range, resolution, accuracy, battery type, display units supported, material grades, and whether it is calibrated. - Whether the product is intended for passenger cars only or also trucks/motorcycles. - Exact manufacturing method and country of origin.